Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ICL Manuals
  4. Spreader
  5. AccuPro ONE
  6. Manual

ICL AccuPro ONE Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
AccuPro ONE
Manual
www.icl-growingsolutions.com

Advertisement

loading

Related Manuals for ICL AccuPro ONE

Summary of Contents for ICL AccuPro ONE

  • Page 1 AccuPro ONE Manual www.icl-growingsolutions.com...

  • Page 2: Spare Parts

    Spare Parts Empty all contents of the box onto a flat surface and check parts to ensure all are present. AccuPro ONE parts list 1. Pneumatic Wheel (X2) 5E. Agitator 10. Control Lever 2. Handle Bar 5F. M6x60 Bolts (X4) 11.
  • Page 3 Assembling your AccuPro ONE ASSEMBLING THE SHUTTER PLATE, LOWER FRAME AND STAND: Tools required: Locate the lower linkage (13) and place it through the You will need a cross head screwdriver, one pair of pivot bracket (12). plyers/grips and an M6 metric spanner.

  • Page 4: Attaching The Wheels

    Assembling your AccuPro ONE Take the stand (Item 3) and place it into the protruding Rotate the hopper body (9) to the position shown. Place M6x60 bolts (x4) (Item 5F). Tighten with the M6 nuts the gear box and impellor (4) in the center hole of the (x4) (Item 5G).
  • Page 5 Assembling your AccuPro ONE Take one of the pneumatic wheels. Push the wheel Take the long cotter pin and place it through the hole on through the axle. Make sure the valve is located on the the axle on the inside of the wheel.
  • Page 6 Assembling your AccuPro ONE Protruding from the back of the hopper body (Item 9) is Feed the other end of the control rod (Item 8) through a V-shaped metal bracket (Item 12-pivot bracket). Clip the hole at the back of the control lever (Item 10). Make the L shaped end of the control rod (Item 8) into the hole sure you push the lever all the way to the bottom.
  • Page 7 How to use the AccuPro ONE Step 1: Understand the application rate and settings Application rate settings Scan the QR-code on your fertilizer bag to find out the recommended g/m² and spreader application settings. If you experience any issues finding the correct spreader settings or application rates, please get in contact with your ICL sales representative.
  • Page 8 Koeweistraat 4, 4181 CD Waardenburg The Netherlands Tel.: +31 (0) 418 655 700 Email: info@iclsf.com For further information contact your ICL Technical Area Sales Manager or visit www.icl-growingsolutions.com...