Related Manuals for ICL LHC 5886
Summary of Contents for ICL LHC 5886
- Page 1 5886 / 5887 5886 / 5887 Installation & removal guide Copyright 2015 © ICL Tech Ltd. ALL RIGHTS RESERVED...
- Page 2 YOU HAVE NCR 5886 / 5887 LHC Panel: used on NCR 5886 / Personas / 86 /P86 & NCR 5887 / Personas 87 / P87 ATM with lowered height collar setup...
- Page 3 YOU’LL NEED Small Flathead Screwdriver...
- Page 4 your ATM environment...
- Page 5 install...
- Page 6 LOCATE THE “u”section AT THE EDGE OF PANEl...
- Page 7 Insert the of Panel into WINDOW, one corner at a time...
- Page 8 Check that the top EDGE the panel is sitting flush the window...
- Page 9 Insert side of panel by pulling bottom edge of panel outward pushing side panel into the window...
- Page 10 Repeat step 4 with the other side of the panel...
- Page 11 Press firmly along the bottom edge until the panel clicks into place...
- Page 12 removal...
- Page 13 Wedge flathead screwdriver between bottom corner panel and window...
- Page 14 Drag the wedged screwdriver along the bottom edge of panel...
- Page 15 once the bottom edge of panel separated pull the panel downward remove...
- Page 16 Further questions regarding installation and removal of ICL ATM Design ™ Window Panels, or any other enquiry can be forwared to sales@icltech.co.uk Or please visit us on the web at: www.atmdesign.co.uk/contact.html...