Download Print this page

Sprout PIKLER CLIMBING TRIANGLE Assembly Manual

Download this manual

PIKLER

CLIMBING TRIANGLE

ASSEMBLY GUIDE

Need help?

Do you have a question about the PIKLER CLIMBING TRIANGLE and is the answer not in the manual?

Page 1 PIKLER CLIMBING TRIANGLE ASSEMBLY GUIDE...
Page 3: Included Tools
PIKLER CLIMBING TRIANGLE ASSEMBLY GUIDE PARTS Outer Leg Left Inner Leg Left Metal Insert pressed Dowel Pin extending into back of this hole from back of this hole Outer Leg Right Inner Leg Right 26.75” (7x) (2x) (26x) Short Dowels 28.125”...
Page 4 ASSEMBLY VIDEO Enjoy the best assembly experience sprout-kids.com/ct If using a drill, set clutch on drill to LOW SETTING (around 3). If your drill has two speeds, set it to the SLOW SPEED (1). A high clutch setting will strip screw heads or wood and can render...
Page 5 Repeat with the remaining Short Dowels E using Screw H and a drill and Hex Bit J , or 4mm Allen Wrench I . Once all Short Dowels are tightened into place on Inner Leg Right d , line up the dowels with the indents on the surface of Inner Leg Left c and screw into place.
Page 6 Align Outer Leg Left A with unattached ends of the Long Dowels F , do not screw dowels in place yet. Place the nished Inner Legs ( C & D ) on the inside of both Outer Legs ( A & B ). Align legs so Dowel Pin in the hole on parts C &...
Page 7 When opening the Climbing Triangle for the rst time, you will hear a cracking noise. This is by design; the noise is from the sliding slot which allows the triangle to click open and closed. Feel free to open and close it a few times to try it out.
Page 8 WWW.SPROUT-KIDS.COM QUARK ENTERPRISES 2022 PO BOX 1123, PROVO, UT 84601 DOCUMENT: AI-CT...