Subscribe to Our Youtube Channel
Related Manuals for Sprout PIKLER LABYRINTH TUNNEL
Summary of Contents for Sprout PIKLER LABYRINTH TUNNEL
- Page 1 PIKLER LABYRINTH TUNNEL ASSEMBLY GUIDE PARTS 14.5” (12x) Dowels 14.5” (10x) Bored Dowels (20x) Screws Bottom INCLUDED TOOLS Sandpaper 4mm Allen Wrench Hex Bit long & skinny...
- Page 2 If using a drill, set clutch on drill to LOW SETTING (around 3). If your drill has two speeds, set it to the SLOW SPEED (1). A high clutch setting will strip screw heads or wood and can render parts useless! CLUTCH TOO HIGH: If the drill twists dramatically in your hand when drilling.
- Page 3 Flip the parts so that the Bored Dowels D are pointing up, as shown. Insert Dowels B into their reliefs, as shown below. If the Dowel is tight, twist and push the Dowel into the recess until snug. Place Top A onto Dowels B & C , aligning loosely.
- Page 4 Go through and pull on each Dowel B & C to con rm that there is no excessive wiggle. Flip the product to visually con rm that all Screws E are ush on both sides. WWW.SPROUT-KIDS.COM QUARK ENTERPRISES 2022 PO BOX 1123, PROVO, UT 84601...
Need help?
Do you have a question about the PIKLER LABYRINTH TUNNEL and is the answer not in the manual?
Questions and answers