Miele G 5210 C SCi Active Plus Operating Instructions Manual page 64

Cleaning and care
Inserting the upper spray arm
 Refit the upper spray arm and tighten
it by hand.
Inserting the middle spray arm
 Replace the middle spray arm and
turn the screw thread anticlockwise
until it engages. Make sure that the
recesses in the lock line up.
Inserting the lower spray arm
 Refit the lower spray arm and ensure
that the filter combination lies flat in
the base of the wash cabinet.
64
 Rotate the screw thread of the lower
spray arm clockwise until the arrow in
the viewing window points to the lock
symbol .
 Make sure the spray arms can rotate
freely.

Damage due to soiling entering
the circulation system.
The lower spray arm is used to
secure the filter combination.
Without filters, coarse soiling can
enter the circulation system and
cause a blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
Inserting the cutlery tray (if present)
 Slide the cutlery tray back onto the
rails from the front.
 Replace the safety clips in the rails on
both sides of the cutlery tray.