Page 1
Value-for-Money as the primary aim. And Argon Audio is a brand fully compliant with these values. Design, and engineering is done in Denmark and manufacturing takes place in the Far East, where quality vendors are highly competitive - and as a result supply outstanding Value-for-Money products.
DC12V 1,5A Power adapter • Bass port foam plug o Inserted into the bass port on the back of the RADIO2 it will lower the bass level – this can be useful if you place the RADIO2 close to a wall. •...
R a d i o 2 2. Usage, controls and connections This chapter describes and shows you the location of the various controls and connections on your Argon RADIO2 Usage, controls, connections Function 1. Preset buttons and Bluetooth 1) In DAB and FM mode - Press 1-6 to recall a stored radio.
Mode. 6. To tune stations in FM Mode press and hold the “Autotune” (2) button for 3 sec. and the RADIO2 will scan to the next available station. You can store FM stations like mentioned in point 3.
Page 6
R a d i o 2 To do a manual scan 1. Press and hold the Display (5) button for three seconds until the text in the display changes. 2. Turn the Tuning/select (3) button/knob until the display shows <Manual Tune>. 3.
R a d i o 2 <Prune> This function removes all invalid stations, indicated in the station list with a ‘?’ in front of the station name. 1. Choose “Yes” or “No” using the Tuning/select (3) button/knob 2. Confirm your choice by pressing the Tuning/select (3) button/knob. <System>...
Press the 6/pair (1) button on RADIO2 front. o On your phone Argon Radio2 will show up, press the Argon Radio2 text. o Your phone might ask to allow for Radio2 to “access contacts and call history”. Accept this.
2. Press the 1/pause/play (1) button on RADIO2 front to pause or start playback after pause. 3. Press the 2/skip track back (1) button on RADIO2 to skip track to previous track. 4. Press the 2/skip track forward (1) button on RADIO2 to skip track to next track.
R a d i o 2 4.3 Setting the alarm The Radio has two Alarm presets 1. When your radio is in ON mode (playing), press the Alarm (7) button. The display will show “Alarm 1 setup”. If you press one more time it will show “Alarm 2 setup”. Press the Tuning/select (3) button/knob on either “Alarm 1 setup”...
R a d i o 2 4.5 <System> settings and information The radio has a system menu with various functions and information. The system menu can be accessed from all playback modes. 1. To enter the system settings press and hold the Display (5) button for three seconds. 2.
R a d i o 2 4.5.4 Inactive standby 1. Press the Display (5) button for about 3 seconds until the menu appears. 2. Then turn the round Tuning/Select (3) button until is shows "System" in the display and select this with a press on the Tuning/Select (3) button. 3.
Need help?
Do you have a question about the RADIO2 and is the answer not in the manual?
Questions and answers