Loading A Disc; Manually Ejecting A Disc; Using The Dvd Function - IBM ThinkPad CD-RW/DVD-ROM Combo IV Ultrabay 2000 Drive User Manual

Loading a disc

1. Press the Eject button. The tray slides out of the drive.
2. Place a disc in the tray with the label facing up.
3. Close the tray by gently pushing the tray in until it latches.
Attention: Do not use force or insert foreign objects to open the tray. If your tray does
not open when you press the Eject button, see "Manually ejecting a disc" for more
information.

Manually ejecting a disc

If you press the Eject button and the tray does not slide out, turn off the
computer and straighten a large paper clip to form a tool, as shown in the
illustration. The straightened end must extend at least 45 mm (1.8 in.). Insert
the extended end into the manual-eject hole on the front of the drive. Push the
paper clip until the tray opens. Gently pull out the tray until you can remove
the disc.

Using the DVD function

To use the DVD function, you need to set up your computer as follows after
installing the CD-RW/DVD drive into the Ultrabay 2000 drive bay:
1. Enable the DMA setting (Windows XP and Windows 2000 users only).
2. Install WinDVD (the DVD movie player program).
45 mm
1.8 in
Chapter 2. Using the CD-RW/DVD drive
7