Explanation Of Displays And Buttons; Explanation Of Functions - Centronic SensorControl SC711 Assembly And Operating Instructions Manual

• Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
• Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
•
Note that the range of the radio signal is limited by legis-
lation as well as by design.

Explanation of displays and buttons

190

Explanation of functions

Control button
The button commands are executed in the following order RETRACT - STOP -
EXTEND - STOP, etc.
Control button
Programming button
Wind sensor
15 - en