Viking X-35 Series Product Manual page 6

Typical Installation on SIP Based VoIP Phone System
Viking
X-35
Entry Phone
Viking Customer's
supplies Responsibility
* Note: A PoE extender can be used for an additional 100 meters per extender. For longer runs
(up to 2 km / 1.2 miles) an ethernet to fiber media converter can be used.
• 10/100 or 1 Gbps network connection with PoE (Class 2)
• Ethernet Cable: Cat 6
• Browser for accessing the X-35 Web UI for Programming. Supported browsers: Chrome, Firefox,
Opera, and Konquerer
• Computer with X-Series Discovery Utility (to find the unit's IP address for UI access).
• X-Series Discovery Utility Software
Download here: https://vikingelectronics.com/wp-content/uploads/X-SeriesDiscoveryUtility.zip
100m (328 ft) maximum*
10/100/1000 Mbps
Optional
PoE Injector
(If VoIP PBX does
not have PoE)
Network Infrastrusture Requirements
SIP VoIP PBX
or
PC with
SIP Server
Software
Optional
Switch / Hub
(Extends range of
cable, keeps 1 Gbps
network speed for other
equipment on network)
6
Internet
NVR Solution