Download Print this page

Para Mobility PLATYPUS Manual

Pool steps

Table of Contents

Download this manual

Platypus Pool Steps

Handrail Re-Installation

4mm Allen Key or Hex Driver bit

10mm spanner

Unwrap the Steps and handrails ready for re-installation.

Find the Bolts in the Goal Posts for the top bots and in the bag taped/cable tied to the goat post for

the base bolts.

Lay steps on back as indicated below and identify by the coloured tape which handrail is for which

side.

Unit 31/276 New Line Road, Dural NSW 2158

sales@paramobility.com.au

www.paramobility.com.au

P 1300 444 600

Table of Contents

Do you have a question about the PLATYPUS and is the answer not in the manual?

Page 1 Platypus Pool Steps Handrail Re-Installation P 1300 444 600 Unit 31/276 New Line Road, Dural NSW 2158 sales@paramobility.com.au Tools Required www.paramobility.com.au 4mm Allen Key or Hex Driver bit 10mm spanner Step 1 Unwrap the Steps and handrails ready for re-installation.
Page 2 Step 3 Slide handrail down Goal Post (on correct side) then align with the hole in the bottom Step. You may need to wiggle around a little to get into the hole. Once through, keep moving both through together. Handrail will need to slide over the grip tap that is at the bottom of the Goal Post to minimise movement ongoing.
Page 3 Insert in correct direction and adjust in pool to correct position across the 4 feet to have steps level. Once level and sitting comfortably, use the extra nut to lock the foot into the height position required. If you have any question or issues in completing this install, please contact Para Mobility Customer Care on 1300 444 600.