Connecting A Digital Audio System With Arc/Earc - Hisense A6H User Manual

Note:
• If you prefer to use Audio Return Channel/Enhanced Audio Return Channel, please refer to
External Devices > Connecting a Digital Audio System with ARC/eARC
You can connect the DIGITAL AUDIO OUT port on the back of the TV to the optical port on the amplifier.
•
Then go to > Settings > Display and sound > Audio Output > Digital Audio Output to choose
Dolby Audio - Dolby Digital to receive the Dolby Digital audio.

Connecting a Digital Audio System with ARC/eARC

If you would like to use the ARC(Audio Return Channel)/eARC(enhanced Audio Return Channel) feature to
send sound from the TV by a HDMI cable to a digital sound system, you can connect it to the HDMI (ARC/
eARC) port of your TV.
By using this feature, you can also control the sound system with your TV remote instead of using the remotes
for each device.
After the connection:
1. Power on the sound system.
2. Press button on your remote control to select Settings > Display and sound > Audio Output >
Audio Output > ARC/eARC
Note:
• Audio receiver must support ARC/eARC function.
• If the device has an Input Selector feature, then make sure to change it to TV.
• When this port is used for ARC function, it can be used as signal input when a DVD is connected to an
amplifier and the amplifier is connected to the TV at the same time. Some amplifiers may not support
series connection.
5.1 CH (channel) audio is available when the TV is connected to an external device that supports 5.1
•
channel surround sound. You can press
and sound > Audio Output > Digital Audio Output to choose Dolby Audio - Dolby Digital Plus to
receive the 5.1 channel audio.
Related information
Select Speakers on page 28
Connecting to External Devices
button on your remote control to select Settings > Display
21
Connecting to
in this manual.