Page 1
Please take a moment to follow the below steps to ensure the correct set-up (or pairing) of your remote. Step 1: Install batteries in your remote before use. Step 2: Contact our customer service at 1-800-973-8374 or customerservice@reverie.com if you need any additional assistance.
OR WEARING MEDICAL DEVICES. FOR working properly, dropped or damaged, HOUSEHOLD / RESIDENTIAL USE ONLY. DO or dropped into the water, call Reverie PRODUCT RATINGS NOT USE OUTDOORS. This product conforms customer service.
Remove the securing fasteners on ® the accessory components, and set Manufactured by Reverie them aside from the undercarriage For Warranty and Service: of the base. 1-800-973-8374 customerservice@reverie.com...
Remote Pairing Emergency Power Down IF YOU HAVE A WIRELESS IF YOU HAVE A WIRED REMOTE REMOTE Feature If you have a wired remote and want to connect to 2 power bases that will Your remote is already paired Your power base has an emergency move in tandem as a single unit, follow with your power base.
Remote Control Operation Guide HEAD AND FOOT ADJUSTMENTS (A,C) Adjusts the head and foot sections to the desired positions. A. RAISE & LOWER HEAD SECTION FLAT (B) B. RETURN TO FLAT Returns both head and foot to the flat position. C.
Headboard Bracket Assembly PARTS LIST STEP 1 STEP 4 A. Inner Headboard Brackets (2) Lower the head section of your B. Outer Headboard Brackets (2) Use the remote control to raise the power base and check that there head of the base in order to gain C.
Troubleshooting In the event the Power Base fails to operate, investigate the symptoms and possible solutions provided in the chart below: SYMPTOM SOLUTION • Make sure your remote is paired or plugged into the bed. • Your electrical circuit breaker may be tripped. •...
Page 8
Please call Customer Service. • Either your phone is connected to the bed via the Reverie Nightstand app or another remote is Remote states other remote connected. connected. Disconnect from bluetooth in the app and make sure the other remote is asleep.
Need help?
Do you have a question about the O300 and is the answer not in the manual?
Questions and answers