Fisher & Paykel OB60 Care And Cleaning page 2

What?
1. Clean with a solution of mild detergent or baking
soda and hot water, then wipe dry.
2. Wipe with a glass cleaner and dry with a soft, lint-
free cloth.
Clean with a solution of mild detergent and hot water,
Dials
then wipe dry.
Stainless
• Clean with a solution of mild detergent and hot
steel strip/
water, then wipe dry with a microfiber cloth.
handle on
the front of
• If necessary, use a suitable stainless steel cleaner
the oven
and polish.
door
To clean light soiling off the surfaces:
1. Wipe with a damp cloth and a solution of hot water
Catalytic
and mild detergent or an ammonia-based cleaner.
panels
2. Wipe dry with a soft cloth.
(OB60SL9
models
• To clean stubborn, 'baked on' soiling run the oven
only)
on Fan
Grill at 200°C for 1.5 hours to enhance the catalytic
panel cleaning function.
https://producthelp.fisherpaykel.com/nz/Cook/Built-In_Ovens/Single/OB60/OB60SL11DEPX1/User_Guide_OB60SL11DEPX1...
How? Important!
could result in the glass cracking
or shattering.
• Even if you only clean the inner
pane (C), remove the door and the
pane first. Cleaning the glass with
the pane in the door may result in
cleaning liquid running down the
gaps and drying onto internal
components.
• Take particular care when
cleaning the control panel glass.
Only use a damp cloth with
detergent.
Do not use stainless steel or oven
cleaner on the dials, as doing so may
damage their coating.
• Always read the label to make
sure that your stainless steel
cleaner does not contain chlorine
compounds as these are corrosive
and may damage the appearance
of your oven.
• Always rub the stainless steel in
the direction of the grain.
• These panels are normally 'self-
cleaning' because their special
enamel breaks down greasy
splatters when the oven is used
for 'non-greasy' baking, especially
at high temperatures.
• Do not use oven cleaner on the
catalytic panels.
• Do not immerse catalytic panels in
water.
Updated: Thu, 07 Jul 2022 06:52:43 GMT
Powered by
2