Fisher & Paykel OB60 Care And Cleaning page 13

5. Brace the top of the door against your body. Grasp
both sides of the outer edges of the pane at the
bottom of the door.
6. Gently pull the pane toward the top of the door.
7. When the pane is clear of the clamp at the bottom
of the door, lift the pane slightly.
After cleaning, replace the door glass panes
When replacing the glass panes, make sure that:
• you replace all panes correctly, as shown. Each pane must be in the position described below in order to fit into the
door and to ensure that the overn operates safely and correctly
• you take extra care not to bump the edges of the glass against any object or surface
• you do not force any of the panes into place. If you are experiencing difficulties replacing the panes, remove them
and start the process again from the beginning. If this still does not help, call Customer Care.
1. Insert the pane into the lower notch on the top clamps at the top of the door.
2. Carefully pull the pane toward the top of the door.
3. Slot the pane into the lower notch on the bottom clamps at the bottom of the drawer.
https://producthelp.fisherpaykel.com/nz/Cook/Built-In_Ovens/Single/OB60/OB60SL11DEPX1/User_Guide_OB60SL11DEPX1...
Do not twist or rotate the
pane as this may cause it to
break. Only lift the pane
slightly. Angling the pane
too far may cause it to
break.
8. Slide the pane out of the top clamp and lift out.
Updated: Thu, 07 Jul 2022 06:52:43 GMT
Powered by
13