Removing The Hard Disk - Sony PS3 CECH-2001A Instruction Manual

Notice
It is recommended that you regularly back up data on the hard disk. If for any
reason software or data loss or corruption occurs or the hard disk must be
initialized during authorized service, it may not be possible to restore or repair
the software or data. Sony Computer Entertainment Inc. and its subsidiaries
and affiliates will not be held liable for damage or injury related to software or
data loss or corruption.
Backing up data in a single operation
You can back up data that is saved on the hard disk to a USB mass
storage device in a single operation. Select
Settings) [Backup Utility], and then follow the on-screen instructions
to perform this operation. You may not be able to back up some
content.
Hints
 In some cases, you may not be able to use the backup utility feature to back up
the system correctly. It is recommended that you create a spare backup for
important data in advance by manually copying or moving the data to a USB
mass storage device.
 For details on the backup utility feature, refer to the online user's guide
(http://manuals.playstation.net/document/).
Backing up selected data
The following file types saved on the system's hard disk can be copied
or moved to a USB device. Select the file, press the
select [Copy] or [Move] from the options menu.
File type
Saved data from games; video, music
or photo files
(Settings) (System
button, and then
Back up destination
USB mass storage device
(USB flash drive, etc.)
Hints
 You may not be able to copy or move files that contain copyright-protected
data.
 By using a commercially available card reader/writer (USB connector type), you
can back up files saved on the hard disk to storage media such as a Memory
Stick™ or an SD Memory Card.

Removing the hard disk

Caution
 For safety reasons, be sure to turn off and unplug the system before
attempting to remove the hard disk.
 The system may not be stable when placed upside down. Be careful not to
injure yourself when removing the screw.
1
Press the power button to turn off the system.
The power indicator turns solid red and the system enters standby mode.
2
Unplug the AC power cord, and then disconnect the other
cables from the system.
For safety reasons, remove the plug for the power cord from the electrical
outlet, and then detach the other cables.
US
39