Setbrowsefiltergenre - Roku M1000 Software Manual

SetBrowseFilterGenre

Syntax:
SetBrowseFilterGenre filter-string
Classification:
Synchronous
Result Type:
No results
Responses:
ParameterError – no filter string given
OK – indicates success
Example:
SetBrowseFilterGenre Rock
SetBrowseFilterGenre: OK
SetBrowseFilterGenre sets the RCP session's current genre browse filter to the
filter-string given as a parameter. Browse filters may be used to limit the results
of the browse listing commands. The genre filter will affect the results returned
by ListSongs, ListAlbums, ListArtists, and on some servers, ListComposers.
Browse filters are case-sensitive and do not perform partial-matches. The filter
term given for SetBrowseFilterGenre should be a result string from the
ListGenres command.
ISSUE: After setting browse filter, there is no way to clear it until calling one of
the browse listing commands (like ListSongs, ListArtists, etc.).
HISTORICAL NOTE: Until software version 2.5.155, the browse filters were
global across all RCP sessions.
Copyright© 2006 Roku, LLC Page 59 www.rokulabs.com