Upnpgetdeviceinfo - Roku M1000 Software Manual

UPnPGetDeviceInfo

Syntax:
UPnPGetDeviceInfo n|uuid
Classification:
Synchronous
Result Type:
Returns a UPnP device info object
Responses:
ParameterError – invalid device specification
Example:
UPnPGetDeviceInfo 0
UPnPGetDeviceInfo: uuid: 89665984-7466-0011-091a-
a62f49107165
UPnPGetDeviceInfo: type: schemas-upnp-
org:device:MediaServer:1
UPnPGetDeviceInfo: deviceDescriptionURL:
http://172.17.0.60:9000/DeviceDescripti
on.xml
UPnPGetDeviceInfo: rootDevice: 1
UPnPGetDeviceInfo: service[0]: schemas-upnp-
org:service:ContentDirectory:1
UPnPGetDeviceInfo: service[1]: schemas-upnp-
org:service:ConnectionManager:1
UPnPGetDeviceInfo: OK
UPnPGetDeviceInfo returns the full information on a UPnP device that was
gathered during a UPnP device search initiated with UPnPSearch. The RCP
client must have already called UPnPSearch prior to executing this command.
The parameter is either a zero-based index into the search results or the uuid of
the device to get info for.
Copyright© 2006 Roku, LLC Page 133 www.rokulabs.com