2: Wi-Fi Setup Help - Roku SoundBridge M1000 User Manual

APPENDiX 2: Wi-Fi SETUP HELP
Wi-Fi Setup instructions
SoundBridge is configured to automatically connect to your Wi-Fi network during initial setup.
If you are not able to access Internet radio or music libraries on your Mac or PC, first check your
network connection by following these steps:
1. From the Source menu, choose System Configuration and press Select [4].
2. Scroll down to Show Wi-Fi Status and press Select [4]. If connected, a message displays
telling you that your wireless network is connected and the name of your network displays.
Multiple Wi-Fi Networks
If SoundBridge detects more than one Wi-Fi network, you will be asked to select which SSID
(network name) you want to use. You will only be asked to select an SSID if you have more than
one wireless network at your location. If you have more that one network, scroll down to select
from the Wi-Fi networks you have and press Select [4].
You can also enter the name of a Wi-Fi network. To enter a network name, follow these steps:
1. From Select Wi-Fi SSID and Password, select Specify a wireless network and press
Select [4].
2. Use Right/Left [◁ ▷] to find letters, number and spaces in the Wi-Fi network name and
then press Select [4] for each letter, number and space you choose.
3. Use Up/Down [△ ▽] for "OK," spaces, delete, commas, periods, accent letters, numbers and
uppercase or lowercase letters.
For additional help connecting to your network, including password help, see "Appendix 2: Wi-
Fi Access Point Password."
Entering a Security Key
If you have a security key, you will need to enter your WEP [Wired Equivalent Privacy (802.11
encryption protocol)] key. This is the same key you entered into your Access Point and your
computer. To find more information about your Access Point, see "Appendix 2: "Wi-Fi Access
Point Password."
Section 11: Appendices
11
53