Related Manuals for REMS E-PUSH
Summary of Contents for REMS E-PUSH
- Page 1 TESTING INSTRUCTION MANUAL PART 1: REMS E-PUSH REMS E-PUSH 2 PART 2: REMS Multi-Push S REMS Multi-Push SL REMS Multi-Push SLW PART 3: REMS Push REMS Push INOX...
- Page 2 PART 1 PART 1: REMS E-PUSH REMS E-PUSH 2...
- Page 3 REMS E-PUSH Fig. 1...
- Page 4 Fasten the (5) high-pressure hose by means of screws at the (6) connecting WARNING piece. Only use the REMS E-Push for pressure and tightness tests of piping systems, receptacles and for fi lling solar power systems. 3. Operating the unit All other uses are not for the intended purpose and are prohibited.
- Page 5 Ne pas utiliser le câble pour des fi ns auxquelles il n’a pas été prévu, notam- ment pour porter l’appareil, l’accrocher ou pour débrancher l’appareil en reasons, for which REMS is not responsible, shall be excluded from the warranty tirant sur la fi che mâle. Tenir le câble éloigné de la chaleur, de l’huile, des Services under the warranty may only be provided by customer service stations angles vifs et des pièces de l’appareil en mouvement.
- Page 6 REMS E-PUSH 2 Fig. 1...
- Page 7 ● Check the power cable of the power tool and extension leads regularly for e) Do not overreach. Keep proper footing and balance at all times. This enables damage. Have these renewed by qualifi ed experts or an authorised REMS better control of the power tool in unexpected situations.
- Page 8 Electric pressure test pump with pressure gauge. 1.5 m suction hose ½" Only operate REMS E-Push 2 with the suction fi lter (4) and suction fi lter with connection, suction fi lter, gasket, suction fi lter with check valve. 1.5 m high- check valve (10) fi...
- Page 9 Do no used damaged hoses. very hot in operation. Do not touch them. To remove the hoses (2) and (5), wait Clean plastic parts (e.g. housing) only with REMS CleanM machine cleaner (Art. until they have cooled down or use suitable hand protection.
- Page 10 8. Spare parts lists thorized purposes, interventions by the customer or a third party or other reasons, for which REMS is not responsible, shall be excluded from the warranty For spare parts lists, see www.rems.de → Downloads → Parts lists.
- Page 11 PART 2 PART 2: REMS Multi-Push S REMS Multi-Push SL REMS Multi-Push SLW...
- Page 12 14 14 13 13 39 39 Fig. 1 Fig. 2 31 29 Fig. 3 Fig. 4 Vol. ca. l/m Cu ( EN 1057 ) St ( EN 10255 ) Plastik Dim. Dim. Vol. Vol. Dim. Vol. Zoll (Inch ) ca. l/m ca.l/m ca.
- Page 13 38 38 38 Fig. 7 Fig. 8 max. 5,5 h Fig. 9...
- Page 14 15 Flush drain personal injury. 16 Disinfection and cleaning unit supply REMS V-Jet TW or REMS V-Jet H e) Do not overreach. Keep proper footing and balance at all times. This enables 17 Pressure limiting valve better control of the power tool in unexpected situations.
- Page 15 The power tool could be damaged by overheating. ance with information leafl et “Leak Testing of Drinking Water Installations” (January ● REMS Multi-Push S may only be operated with software as of “Update 03.40, 2011) of the German Central Association for Sanitary, Heating and Air Conditioning Date 2020-04-08”.
- Page 16 Water pressure pipe network ≤ 1 MPa/10 bar/145 psi (4)) for approx. 2 s, then release it. REMS Multi-Push is switched on and the Water pressure when fl ushing with compressed air ≤ 0.7 MPa/7 bar/101 psi compressor switches on. The screen (6) is illuminated and the Logo REMS Water fl...
- Page 17 To fl ush drinking water pipes after the house connection (water meter) (Fig. 3), 2. Unpack the ZIP fi le fi t the REMS fi ne fi lter (12) (Art. No. 115609) with fi lter cartridge 90 µm. Connect 3. Save “update.bin” on USB stick the suction/pressure hose (13) to the fl...
- Page 18 Preparing for installation Preparing for installation Fit the REMS fi ne fi lter (Fig. 3 (12)) (Art. No. 115609) with fi lter cartridge 90 µm Before cleaning and preserving heating systems with REMS Multi-Push, safety after the house connection (water meter). Connect the suction/pressure hose devices for the prevention of drinking water contamination by fl...
- Page 19 The electronic memory of REMS Multi-Push holds 40 fi les (logs). A soon as a REMS fi ne fi lter with fi lter cartridge 90 µm, Art. No. 115609). “The pipe system program has been selected from the Start menu and the selected data have can be fl...
- Page 20 2. Test with compressed air \ Enter Fit bottle to the disinfection unit REMS V-Jet TW as shown in Fig. 7 (21). The 3. Leak test \ Enter nozzles installed in REMS V-Jet TW and REMS V-Jet H for automatic dosing 4.
- Page 21 (January 2011) of water installations with compressed air, inert gas or water” (January 2011) of SLW for these tests is fed by the built-in compressor of the REMS Multi-Push. the German Central Association for Sanitary, Heating and Air Conditioning the German Central Association for Sanitary, Heating and Air Conditioning The hydro-pneumatic pump generates a water pressure of max.
- Page 22 ● Remove the locking ring from the cap of the 1 l bottle of REMS CleanH measured pressures. Changes in these parameters must be considered, if cleaner for heating systems.
- Page 23 2.1 Electrical Connection. If Error is displayed again, the procedure must be repeated after pressure in the REMS Multi-Push has been relieved. To do this, pull out the mains plug, close the water pipe and remove all the hoses, caps and stoppers from the REMS Multi-Push, then switch back on according to 2.1 Electrical Connection of Machine.
- Page 24 ● Have the REMS Multi-Push checked/repaired by an authorised REMS customer service workshop. 5.6 Fault: The pressure in the pipe to be tested is not relieved after running the test with water programs or during the test with water B, P+M (REMS Multi-Push SLW). Cause: Remedy: ●...
- Page 25 European standards are not applicable, in national standards.” Moreover: “Transport, storage, handling and use of all these disinfectants can be dangerous, therefore REMS Multi-Push, REMS V-Jet TW and REMS V-Jet H may not be thrown in health and safety requirements must be strictly observed.”...
- Page 26 Leak test European standard EN 1775:2007 “Gas supply – gas pipe systems for buildings” c) Usefulness test for systems in operation” (this cannot be carried out with REMS This European standard EN 1775:2007 “Gas supply – gas pipe systems for buildings”...
- Page 27 “At the end of the disinfection of drinking water installations, the used disinfection solution must be cleared so that no damage to the environment is caused. The oxidising effect of the disinfectant can be rendered ineffective by adding reducers. The pH value must also be observed and corrected if necessary.” An application concentration for the dosing solution for hydrogen peroxide H 150 mg H / l and an exposure time of 24 hours are recommended.
- Page 28 PART 3 PART 3: REMS Push REMS Push INOX...
- Page 29 Fig. 1 Fig. 2...
- Page 30 Only use the tool for the intended purpose and under observance of the general safety and accident prevention rules. REMS Push and REMS Push INOX are designed for pressure and leak testing of pipe systems and vessels. All other uses are not for the intended purpose and are a) Keep your workplace tidy.
- Page 31 7. Spare parts lists thorized purposes, interventions by the customer or a third party or other reasons, for which REMS is not responsible, shall be excluded from the warranty For spare parts lists, see www.rems.de → Downloads → Parts lists.
Need help?
Do you have a question about the E-PUSH and is the answer not in the manual?
Questions and answers