Princess Slow Juicer Manual

PARTS DESCRIPTION

1. Fruit pusher
2. Top cover
3. Auger
4. Micro-mesh filter
5. Container
6. Main unit
7. Juice jug/pulp jug
8. Cleaning brush

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never use abrasive products.
• This product is equipped with dual security system and it will not start working before all the parts and component are installed correctly.

USE

• Before assembling the juicer, please make sure that the bottom of the container is sealed, by pushing the rubber seal into place.
• Assemble the juicer by placing the container on the main unit, and inserting the micro-mesh filter into the container. Make sure it has been positioned correctly. After that, place the auger into the micromesh filter. Make sure that it has been firmly placed in the filter.
• Now place the top cover on the container, and turn it until it locks into place. The device won't operate until the top cover is locked into place properly.
• It is advised to use fresh fruits to get the highest amount of juice.
• Wash the fruit, and cut it in chunks that fit in the tube. Be sure to remove the pits and hard cores from the fruit.
• Push the on-button, insert the fruit in the tube, and push it down using the fruit pusher.
• Do not force in the fruit during the juicing process to prevent damage to the auger and the micro-mesh filter
• Do not juice continuously for more than 15 minutes. After using the juicer for 15 minutes, please wait for 5 minutes to let the juicer cool down.
• If the auger becomes jammed, please use the REV button on the back of the device for 5 seconds to reverse the rotation. After this press the on-button again.

CLEANING AND MAINTENANCE

• To clean the device after use, close off the juice outlet, the turn the machine on and pour in clean water. This will push out the remaining residue left in the container.
• When the container has been drained, turn the device off and unplug the power-cord. Disassemble the device, and clean the individual parts.
• Components that have come into contact with food can be cleaned in soapy water.
• The components are not suitable for cleaning in a dishwasher. If exposed to heat or caustic cleaners they might become misshapen or discoloured.