Vitek VT-9001 - Toaster Manual

DESCRIPTION

1. Toasting level control knob «1-2-3-4-5-6/stop toasting»
2. Carriage control lever
3. Slots for bread toasting
4. Removable crumb tray
5. Cord storage

ATTENTION!
For additional protection you can install a residual current device with nominal operation current not exceeding 30 mA into the mains; contact a specialist for installation.

BEFORE THE FIRST USE

After unit transportation or storage at low temperature keep it for at least three hours at room temperature before switching on.

• Unpack the scale, remove any advertising stickers and package materials that can prevent the unit operation.
• Make sure that the mains voltage corresponds to the voltage specified on the unit body.
• There is a cord storage (5) on the bottom of the unit body. You can adjust the optimal power cord length by folding it in the cord storage in a corresponding way.
• Without loading toasts, plug the unit in, set the toasting level control knob (1) to the position «6» and switch the unit on by pressing the lever (2).
• During the first switching on the heating elements burn, therefore occurrence of a small amount of smoke or foreign smell is possible. It is normal.
• If necessary, switch the toaster on for several times.

TIPS

• The toasting level depends on the thickness of the bread slice, bread sort and quality. Never toast too thin or too thick slices; the thickness of the toast should not exceed 20 mm.
• If the toasts are jammed, turn the knob (1) counterclockwise until bumping, the toaster will be switched off. Unplug the toaster and let it cool down. Use a suitable wooden spatula to remove the toasts. Do not touch the heating elements to avoid damaging them.

MAKING TOASTS

• Make sure that the removable tray (4) is installed.
• Put one or two slices of bread into the slots for bread toasting (3).
• Insert the power plug into the mains socket.
• Set the required toasting level using the knob (1):
  «1» – minimal toasting level;
  «6» – maximal toasting level.

Note: Set the control knob (1) to the needed position. The toasting mode depends on the thickness of the bread slice, bread sort and quality; choose it experimentally. Given that it takes some time for the heating element to heat up after the first switching on, the toasting level of the first toasts will be less at the same position of the knob (1).

• Press on the carriage control lever (2) until clamping.
• When the toasts are ready, the unit will be switched off automatically, the carriage control lever (2) will return to its initial position.
• If you want to stop toasting process, turn the knob (1) counterclockwise until bumping, and the toaster will be switched off.
• After the operation unplug the toaster by taking the power plug out of the mains socket and let it cool down.
• Remove the removable tray (4), clean it off the crumbs and install the tray back to its place.

CLEANING AND CARE

• Before cleaning make sure that the unit is unplugged.
• Wait until the toaster cools down completely.
• Clean the outer surface of the toaster body with a damp cloth and then wipe it dry.
• Do not use coarse sponges, abrasives and solvents to clean the toaster.
• Remove the tray (4), clean it off the crumbs and install the tray back to its place.
• Do not immerse the unit, the power cord and the power plug into water or any other liquids.
• To avoid injuries or damage of the unit, never insert foreign objects into the slots for bread toasting (3).

STORAGE

• Clean the unit before taking it away for storage.
• Fix the power cord in the cord storage (5).
• Keep the unit out of reach of children and disabled persons.

DELIVERY SET

Toaster – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 700 W