Connecting To The Network - Mitel 4000 Series Hardware Installation Manual

1.6

Connecting to the Network

Connect the Mobility Router to a network device, such as a switch, using the straight-through Ethernet cable
provided with the Mobility Router.
To connect the Mobility Router to the network:
1
Insert one end of the Ethernet cable to the network device.
2
Insert the other end of the Ethernet cable to the left Ethernet port (ETH0) on the rear of the Mobility Router.
NOTE
network.
Figure 1-5. Connecting the Ethernet Cable to the Mobility Router
If using the Secure Remote Voice feature, connect the second Ethernet port (ETH1) to the external
Mobility Router 4000 Series Hardware Installation Guide
Mobility Router 4000 Installation
Connecting to the Network
1
7