Connecting Power - Mitel 4000 Series Hardware Installation Manual

1.8

Connecting Power

To connect AC power:
1
Insert the female end of the power cord into the back of the Mobility Router.
2
Connect the other end of the power cord into an appropriate AC power source.
Figure 1-7. Connecting Power
3
The Mobility Router automatically powers on. As the Mobility Router starts up, messages display in the
terminal emulation software window. Use the initial configuration wizard to initially configure the Mobility
Router with "Using the Initial Configuration Wizard" on page
Mobility Router 4000 Series Hardware Installation Guide
Mobility Router 4000 Installation
Connecting Power
10.
1
9