11. DVI Digital Video Interface RGB Digital Input/Output Connectors
These connectors are used for double or triple stacking.
Use the supplied DVI-D (24 pin) cable to connect the OUTPUT terminal
of the first projector to the second projector's INPUT until all the projectors
are connected. (DVI Standard on HIGHlite 6000Dsx, option on 4000Dsx)
Push the left side of the panel to open the compartment for the
RGB Digital connectors and the optional SDI board.
OUTPUT
INPUT9
RGB
DIGITAL
11
E – 5
OUTPUT
INPUT 0
SDI
Space to install the optional SDI or SX
HDSDI board.
Note
SDI Loop through only available on SDSDI