Corrupted Display Troubleshooting; Dead Player Troubleshooting - Rio S50 User Manual
Rio s50: users guide
Hide thumbs
Also See for S50:
- Installation instructions (1 page) ,
- Using (1 page) ,
- Important information (1 page)
Table of Contents
Advertisement
Troubleshooting
Problem
I can't read the
First make sure that the battery has power.
display;
If the player firmware becomes corrupted for any reason, follow these steps to restart
the player in Recovery mode. After you restart the player in Recovery mode, proceed
The player
with the firmware update.
seems "dead";
Note: Performing a recovery mode firmware update erases all content on the
player.
The player
1 Turn the player OFF.
firmware is cor-
rupted
2 Open the battery compartment cover and remove the battery.
3 After five seconds has elapsed, reinstall the battery, matching the "+" symbol on the
battery with the symbols in the battery compartment. Replace the battery compart-
ment cover.
4 Connect the player to the computer with the supplied USB cable.
5 While holding down MENU, turn the player ON.
6 Keep holding MENU until "UPGRADER" is displayed on the screen.
7 Proceed with loading the firmware update.
Rio player
We recommend that you reconnect to the secure service where the timed content came
doesn't play
from — with the Rio player connected to your computer with the USB cable and turned
secure, timed,
on — after you change the battery. This should will reset the Rio player's clock. After
(date depen-
dent) content
after the bat-
tery is changed
the clock is reset, secure, timed content should play normally.
Solution
Troubleshooting
Contents
Index
33
Advertisement
Table of Contents
