Rio S50 User Manual page 10

Step 4: Connect USB
1 Insert the USB cable into the MULTIFUNCTION
port on top of the Rio player. The Rio USB con-
nection only fits one way. Do not try to force the
connection.
2 Connect the other end of the USB cable to your
computer's USB port.
3 Turn your Rio player ON.
Note: The player automatically turns OFF
after being connected to USB for 30
minutes, if no USB commands are received
or no buttons are pressed.
4 PC ONLY: Follow these instructions if the Win-
dows Device Driver wizard displays on the com-
puter screen: Make sure that the software CD is
in your computer's CD-ROM drive. When the wiz-
ard prompts you for the location of the Rio player
drivers, select the "CD-ROM Drives" check box,
then click the "Next" button, and follow the on-
screen instructions.
Step 5: Rip/Load Music
Please see the Using the Music Management Soft-
ware section in this manual for more information
about using the software to encode your audio CDs
into compressed digital audio format, organize your
digital audio collection on your computer, or down-
load music to your Rio player. Please refer to the
complete software online Help for detailed informa-
tion on using each software application.
Getting Started
Contents Index 10