Dell Precision Tower 3630 Installation Manual page 9

4 To install the USB Type-C card:
a To remove the metal bracket as shown below, insert a flathead screwdriver in the hole of the bracket [1], push the bracket to
release the bracket [2], and then lift the bracket out from the system.
b Insert the USB Type-C card into its slot from the inside of your computer [1] and fasten the two M3X3 screws to secure the
USB Type-C card to the system [2].
c Connect the USB Type-C card cable to the connector on the system board [3].
Installing the USB Type-C card 9