Table of Contents
Advertisement
5
Random: Press to mix the play order of all tracks. Press again to cancel.
6
LCD: Liquid crystal display. The LCD shows the fol-
lowing information (clockwise from the upper right):
•
Volume level. The bar graph disappears as
volume is reduced and reappears as volume is
increased. Volume level ranges from 0-20.
•
Track encoding rate. A higher number
indicates higher quality audio output measured in kilobits per second (kbps). See the
Understanding digital audio terms section later in the User Guide for more
information on track encoding bitrate.
•
Battery charge level. The illustration shows one half battery life remaining. All black
indicates a fully charged battery.
•
Intro mode indicator. When displayed, the first 10 seconds of each track are played.
•
A-B. Displays if A-B mode is selected.
•
Random. Displays if Random play mode is selected.
•
Repeat 1/All. Displays if Repeat:Current Track or Repeat:All Tracks is selected.
•
Track number.time counter. Displays track number and time count of the current
track.
•
Play/Pause. Play arrow or vertical Pause displays depending on the current mode.
•
Hold. Displays when the Rio is powered on and set to Hold mode.
•
Download icon: Displays when the Rio One is connected to the computer.
7
Headphone connector: Plug your headphones into this port on top of the Rio.
8
Menu: In Stop mode, press Menu to monitor internal and external flash memory and
firmware version. Press
(Te), and then firmware version number. Press Menu again to hide the display.
9
EQ: Press to change equalization (EQ) settings. There are four EQ settings to choose
from:
•
Normal.
•
Classic.
•
Jazz.
•
Rock.
10 Intro: Press to play the first 10 seconds of each track.
to display total internal memory (Ti), total external memory
Using your Rio One
Page 5
Rio One display
Advertisement
Table of Contents
