Advertisement
Stop Power Off
: After the unit is set to STOP, this feature controls how long the player remains
inactive before turning itself off. When using battery power, a higher setting will shorten the life of the
batteries due to the inactive unit still drawing power.
Control
:
FF/RW Scan
:
ON - This feature will allow you to Fast Forward or Rewind through the current track. Holding
down the right button (Fast Forward) on the Joypad will scan forward through the track. Pressing and
holding the left button on the Joypad (Rewind) will scan backwards through the track.
OFF - Instead of scanning through the current track, it scans through the track list. . Holding
down the right button (Fast Forward) on the Joypad will scan forward through the playlist. Pressing and
holding the left button on the Joypad (Rewind) will scan backwards through the playlist.
Note: When this option is On, scanning through an MP3 or WMA track will not sound as smooth
as scanning through a CD Audio track. Due to the nature of VBR (Variable Bit Rate) encoded MP3 files,
scanning through the track may not function properly.
RW/FW Skip
:
+10/-10- When this option is enabled, a short press, followed by a long press of the right button
on the Joypad (Fast Forward) will move you ahead 10 tracks in your playlist. A short press, followed by a
long press of the left button on the Joypad (Reverse) will move you back 10 tracks in your playlist.
Directory - A short press, followed by a long press of the right button on the Joypad (Fast
Forward) will move you to the next directory. A short press, followed by a long press of the left button on
the Joypad (Rewind) will move you to the previous directory.
Off - A short press, followed by a long press on either Joypad button will have no affect.
FF/RW Speed
: When the FF/RW Scan option is set to On, this setting allows you to control the speed
at which the unit scans through the track. 1X is the slowest, 6X is the fastest.
EQ Button
: This feature allows you to reassign the function of a short press of the EQ button. You may
assign the EQ button to perform the function of the Program, Mode, Navigation, or EQ button. This
feature comes in handy when using the remote, since you may now use the EQ button on the remote to act
as any of the available functions through this option.
Auto Pause
: When set to Yes, this will make the player pause between each track to display the track
information.
Mode
:
All of the settings in this feature set affect which options are available when pressing the Mode button on
the RioVolt. If an option is set to Off, it will not be available when pressing the Mode button on the
player. For example, if you only use the Shuffle All mode, then turning Off all of the other options tell the
RioVolt to only offer Shuffle All when pressing the Mode button on the player.
Repeat 1
: This setting will continually repeat a single track.
Repeat Dir
: This will play all of the tracks in the current directory, and then stop playing.
Repeat Dir All
: This will play of the tracks in the current directly, and then repeat them.
Repeat All
: This will play all of the tracks on the CD, and then repeat them.
Advertisement
