Table of Contents
Advertisement
EN
VIDEO & PHOTO SETTING
Press the Down button
button to select the settings. Press the Mode button
1. Video Resolution
4K 30fps, 2.7K 30fps, 1080P 120fps, 1080P 60fps, 1080P 30fps, 720P 240fps,
720P 120fps, 720P 60fps, 720P 30fps (Default setting is 4K 30fps)
Note: When capturing videos at high resolutions or high frame rates in warm
ambient temperatures, the camera may get high temperature and consume
more power.
2. Image Stabilization
Off/On (Default setting is Off)
This setting adjusts the footage to offset for motion during capture. The footage
will become smoother accordingly, especially in activities with relatively small
but fast motion including cycling, motorcycling, and handheld uses.
3. Loop Recording
Off/2min./3min./5min. (Default setting is Off)
Using Loop Recording, you can continuously record videos, but save only the
moments that you want. For example, if you select a 5-minute interval, only the
previous 5 minutes are saved when you press the OK button to stop recording.
If you record for 5 minutes and do not press the OK button to stop recording and
save, the camera records a new 5-minute interval by recording over your previous
5 minutes of footage. When the memory card is full, the new files will cover old
ones if the loop recording is on.
4. Time Lapse Video
1Sec/2Sec/5Sec/10Sec/30Sec/60Sec (Default setting is 1Sec)
Time Lapse Video creates video from frames captured at specific intervals. This
option lets you capture a time lapse event and immediately view or share it as
a video. Note: Time Lapse Video is captured without audio.
to enter the settings, and press the OK
10
/Up
/Down
to quit.
Advertisement
Table of Contents
