Related Manuals for Lydsto XD-CCJQR03
Summary of Contents for Lydsto XD-CCJQR03
- Page 1 Lydsto Window Cleaning Robot Instruction Manual Please read this manual carefully before use and keep it properly...
-
Page 3: Table Of Contents
CONTENTS Important hint -------------------------------------------------------------------------------- �� Component name --------------------------------------------------------------------------- �� Accessories list ------------------------------------------------------------------------------- �� Remote Control Instructions ------------------------------------------------------------- �� Operation method -------------------------------------------------------------------------- �� Instructions ----------------------------------------------------------------------------------- �� power cut-off --------------------------------------------------------------------------------- �� maintenance --------------------------------------------------------------------------------- �� Lighting effect tips -------------------------------------------------------------------------- �� Product parameters ------------------------------------------------------------------------ �� Troubleshooting ----------------------------------------------------------------------------- ��... - Page 4 �� Important tip Warn Before using this product, please read all contents of this manual carefully and install the machine according to the steps of this manual. Take care of this manual. If you pass the product to a third party, please accompany this manual with the machine.
-
Page 5: Component Name
�� Component name front of main unit Status LED/Start/Pause key Back of the main unit Indicator light Software burning access location Bottom power switch Drive track Host fan Fixed rope Power cable... - Page 6 �� Parts List Host (with safety rope and Remote control components and power cord) Measuring flask Adapter Plug Instruction Manual...
-
Page 7: Remote Control Instructions
�� Remote Control Instructions Start Stop Forward Turn left Turn right Start/pause Step back Back to origin Deep clean Fixed-point cleaning Note: If the machine wants to switch the working mode during the working process, it must first press pause and then press other working modes to be effective. -
Page 8: Operation Method
�� Operation method Serial Operation Specific operation method number method Automatic cleaning: Press the button to automatically clean the entire glass in an "N" shape, and return to the origin after cleaning. Cleaning �� Deep cleaning: After pressing the button, first clean one side of the glass in a "Z" shape, and then clean the mode other side of the glass in an "N"... - Page 9 �� How to use Before use, please make sure that the safety lock assembly has been installed on the host to avoid danger. * The safety lock assembly is pre-installed at the factory, please do not remove it at will.
- Page 10 Scan the QR code, download and install the Lydsto APP, users who have installed the Lydsto APP will directly enter the device connection page. Open the Lydsto APP homepage, on the upper right of the page Click "+" in the corner to add devices according to the APP prompts.
- Page 11 �� Connect the main unit power cord, adapter and plug � * Do not disconnect the power supply when the main unit is running; if you disconnect the power supply, there is a risk of falling.
- Page 12 �� Preparation before use � Secure the safety lock: To ensure safe use, be sure to secure the safety lock before use. It is recommended to attach the safety catch to a strong metal rod. � � � times Spray cleaning fluid �.
- Page 13 Start cleaning � �� Make sure the bottom of the console is powered on. Press the four ball heads at the bottom of the main unit on the glass, and the main unit will adsorb itself start planning the cleaning with a bow-shaped path.
- Page 14 �� End work �、Remove the main unit: After the cleaning is completed, the main unit will return to the vicinity of the starting position and sound a beep. Please hold the handle tightly, press for about � seconds, the suction of the fan will decrease, and then remove the main unit.
- Page 15 �� �、Remove the safety lock � � �、Disconnect the power...
- Page 16 �� Maintenance A.Change the rag Remove the dirty rag, and stick the new rag (dark side up) flatly inside the cleaning bracket at the bottom of the main unit. Please note that the width of the cleaning rag corresponds to the width of the rag holder. Be careful not to stick the cleaning pad outside the rag holder, so as not to affect the normal operation of the host.
- Page 17 Clean the drive wheel tracks �� �、Before cleaning, please make �、Remote control the host through the App or long press the sure that the power switch at the front start/stop button to check the drive wheel track. If you bottom of the main unit has been find dirt, please pause first, spray the cleaning solution twice turned to "ON"...
- Page 18 �� �、Fan: wipe it with a dry rag to avoid �、Floating head: wipe it with a dry rag to prevent damage to the suction of the host. the machine from getting stuck during the wiping process.
-
Page 19: Lighting Effect Tips
�� Lighting effect tips State Lighting effect The host is fully charged. Blue light on The host has successfully adsorbed the glass and can start cleaning. Host suspended. Blue light on and The machine is working. dark interchange Steady red light Host is charging. -
Page 20: Troubleshooting
�� Troubleshooting Serial Possible Causes Failure situation Solution number Adapter not connected Connection adapter Red light flashes, � buzzer beeps Abnormal pressure Stop cleaning, remove machine and restart work The red light is on first, and then the blue light f o r t h e n u m b e r o f r e s p o n s e s fl... - Page 21 �� Manufacturer ： Guangdong Xiaoda Technology Co.,LTD. Address ： Room ���, No. �, Songhu Zhigu R&D Center, No. �,Renju Road, Liaobu Town, Dongguan City, Guangdong Province Service number ： +�� ���-���-���� Certificate of Conformity Checked already...
- Page 22 ��...
- Page 23 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the XD-CCJQR03 and is the answer not in the manual?
Questions and answers