Table of Contents
Advertisement
4.2 Network Quick Guide
IP address
Subnet mask
Default gateway / Router
NOTE: IP address for the computer and the IP address for the BPC Core Unit are different. This
is a design requirement of the IP protocol. Care needs to be taken so that the same address
is not used in both locations, as it will render the system inaccessible from the designated
computer. When using multiple BPC Core Units, make sure that each unit has its own IP
address. This can be achieved by changing the last digit of the IP address.
The OLED screen in the detection unit will display whether the instrument uses a manually
assigned IP or an automatic IP assigned by a DHCP server as well as what IP address is currently
in use and the version of the instrument's software. In this way, it is simple and easy to
connect the instrument to a computer or network.
4.3 Aurora™ Software Description
After inserting the default IP address of the instrument, users will have access to the Log in
page. On the Log in page, the default password bpc needs to be added.
Figure 19. Home page of BPC Blue Software for (A) anaerobic and (B) aerobic tests.
In the Aurora™ software, the type of experiment, anaerobic or aerobic, can be easily selected.
The software offers exceptional flexibility to use the instrument and configure different tests.
Instrument
192.168.10.11
255.255.255.0
Leave empty
Computer
192.168.10.10
255.255.255.0
Leave empty
37
Advertisement
Table of Contents
