Advertisement
OPERATIONAL INSTRUCTIONS
SEAT ADJUSTMENT
Proper seat adjustment is necessary for the massage function.
1. Turn the ADJUSTMENT KNOB(15) counterclockwise to
loosen, but do not remove, then pull the ADJUSTMENT
KNOB(15) to release the pin. Slide the SEAT POST(5)
until the SEAT(43) is at the proper height. Release the
ADJUSTMENT KNOB(15) making sure the pin catches
in one of the holes of the SEAT POST(5) and tighten the
ADJUSTMENT KNOB(15).
2. Sit on the seat and place your feet on the MASSAGE
ROLLERS(40). You should be able to move front and back
and feel comfortable on the MASSAGE ROLLERS(40).
Refer to the illustration.
CAUTION:
1. Do not attempt to adjust the seat while you
are on the Stamina® Seated Upper Body
Exercise Bike.
2. Always tighten the ADJUSTMENT KNOB(15)
after adjusting the seat to a new position.
HANDLEBAR ANGLE ADJUSTMENT
Refer to the illustrations below. The angle of the HANDLEBARS(48) can be set to different angles
from Position 1 to Position 5. Lift the LEVER(10) up using your right foot, adjust the UPRIGHT(8)/
HANDLEBARS(48) to desired position. Then press the LEVER(10) down to lock the UPRIGHT(8)/
HANDLEBARS(48) in position.
3
4
5
15
2
1
Massage
Roller
Advertisement
