Advertisement
Troubleshooting
Check these solutions if your dishwasher...
Problem
Will not start.
An operation or
cycle is taking too
long.
DW7000B_DW80B7070_AA_DD68-00243A-00_EN.indd 43
Possible cause
The door is not closed
completely.
The START button was
not pressed.
Doesn't operate at all.
The water supply does
not work.
The Control Panel is
locked.
A circuit breaker is open.
The dishwasher is
connected to a cold water
supply.
Solution
• Check if the door is latched and
closed completely. Check whether the
Upper Rack is properly joined to the
Duct Nozzle.
• Also, check if the Upper Rack is
crooked or unbalanced.
• See the information code that appears
on the display.
• Make sure the power cable is
connected properly.
• Check if the water supply valve is
open.
• Check if the supplied water pressure
is between 20 and 120 psi (between
140 and 830 kPa).
• Unlock the Control Lock, (See page
27.)
• Reset the circuit breaker.
• Check if the water supply line is
connected to a cold water supply. To
work properly, the dishwasher must
be connected to a hot water supply.
(If connected to a cold water supply,
additional time is required to heat the
cold water.)
English
43
2021-11-11
12:43:27
Advertisement
