Rimage Amigo II Reference Manual page 2

4
Unpack the replacement Producer II.
Refer to the label on the box of your replacement Producer II.
5
Pack the autoloader to return.



6
Set up the replacement Producer II.
Complete the steps in the Rimage Autostar II and Protégé II Setup and
Installation (110630), Rimage Amigo II Setup and Installation (110655), Rimage
AutoEverest Setup and Installation (110660), or Rimage AutoPrism Setup and
Installation (110824) included with your product. These documents are also
available at
www.Rimage.com/Support.html. Navigate: Producer Family > Support - your
product > Documents tab.

Note: You are installing the same printer that you removed from the
Producer II.
Copyright © 2007 Rimage Corporation


2000710_A