Download Print this page

Honda HR-V 2020 Owner's Manual page 93

Hide thumbs Also See for HR-V 2020:

Advertisement

Indicator
Name
Smart Entry
System
Indicator
*
System
Message
Indicator
*
Turn Signal
and Hazard
Warning
Indicators
High Beam
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on as soon as a problem is
detected in the smart entry system
or push button starting system.
• Comes on for a few seconds when
you turn the ignition switch to ON
*1
, then goes off.
(
w
• Comes on along with a beep
when a problem is detected. A
system message on the multi-
information display appears at the
same time.
• Blinks when you operate the turn
signal lever.
• Blink if you press the hazard
warning button.
• Comes on when the high beam
headlights are on.
Explanation
• Stays on constantly or does not come
on at all - Have your vehicle checked by
a dealer.
• While the indicator is on, press the
(information) button to see the
message again.
• Refer to the Indicators information in this
chapter when a system message appears
on the multi-information display. Take
the appropriate action for the message.
• The multi-information display does not
return to the normal screen unless the
warning is canceled, or the
button is pressed.
• Does not blink or blinks rapidly - A
turn signal light bulb has blown. Change
the bulb immediately.
2 Replacing Light Bulbs P. 543, 546, 547
uuIndicatorsu
Message
*
Continued
91

Advertisement

loading