Advertisement
(2) While pushing the projection on each
lock, slide the locks outward.
1 Lock
2 Projection
(3) Remove the electrical box cover from the
electrical box and move it under the deck
beam toward the stern. NOTICE: Do not
attempt to forcefully remove the elec-
trical box cover from the watercraft.
Otherwise, the electrical box cover,
electrical system, and engine could be
damaged.
[ECJ02610]
1 Electrical box cover
(4) While pushing both sides of the fuse box
2
1
(5) When replacing the SCU fuse, remove
1
(6) When replacing a fuse other than the
Trouble recovery
cover inward, pull the cover toward the
bow and remove it.
1
1 Fuse box cover
the screws, and then remove the fuse.
Install the spare fuse, and then tighten
the screws.
1
2 3
4
10
1 Electronic throttle valve fuse
2 Fuel pump fuse
3 Main relay drive fuse
4 Main fuse
5 Spare fuse
6 Fuse puller
7 Battery fuse
8 Screw
9 SCU fuse (BCU fuse)
10 Security system fuse
SCU fuse, remove the fuse using the
fuse puller. Install a spare fuse of the
proper amperage. WARNING! Do not
5
6 7
8
9
8
5
97
Advertisement
