Advertisement
Quick Links
Advertisement
Summary of Contents for Turbo Air TIM-50A
- Page 1 Ice-maker User Manual...
- Page 2 Contents 1. Product features ------------------------------------------------------------------------------------ 1 2. Product accessories -------------------------------------------------------------------------------- 2 3. Product specifications ----------------------------------------------------------------------------- 3 4. Product structure ----------------------------------------------------------------------------------- 4 5. Installation ------------------------------------------------------------------------------------------- 5 1) Unpacking and installation 2) Connection of inlet pipe and drain pipe 6. Precautions for the use of power cord ------------------------------------------------------- 7 7.
- Page 3 1. Product features Thank you for purchasing our product. Make sure to read this manual in order for safe use. ■ MICOM control → Electronic temperature control is introduced to automatically regulate ice size according to ambient temperature in the production process. ■...
- Page 4 2. Product accessories ■ Check the following accessories before use. ■ Please contact our aftersales services center if any of the following accessories is absent. Inlet pipe joint 2EA Drain pipe clamp 1EA Inlet pipe 1EA Drain pipe 1EA Ice scoop 1EA Leveling foot 4EA ※...
- Page 5 3. Product specifications Spec. Item Unit TIM-50A TIM-75A TIM-100A Max. ice making mass Kg/Day ≤30 ≤30 ≤30 Ice-making time Height 1010 Dimensions Length Width Ice size 22 x 22 x 22 22 x 22 x 22 22 x 22 x 22...
- Page 6 4. Product structure Front View Rear View Cabinet top Back cover Door Machine room Display panel cover Controller Drain pipe connector Inlet pipe Condenser vent connector Power cord Leveling foot Side View Downpipe LED lamp Waterproof curtain Evaporator (ice sheet) Inner container Unloading transducer...
- Page 7 5. Installation 1) Unpacking and installation 1. Remove the transport case, tapes and packages. It may fail to run properly if any packaging material is left on the ice-maker. 2. Take out the accessory box inside and install the leveling feet. 3.
- Page 8 5. Installation 2) Connection of inlet pipe and drain pipe 1. Permissible water pressure: 20~80 PSIG. - Reduce water pressure through depressurization when inlet pressure is high. 2. For ice making, use clean water filtered with a water purifier. - Direct use of tap water will produce scale which may block the pipeline and cause the ice-maker to fail.
- Page 9 6. Precautions for the use of power cord ■ Do not use a common power strip together with other equipment, but use a dedicated socket-outlet. ■ Do not insert or unplug the power cord with wet hand, since there is the danger of electric shock. ●Power strip is among the causes of fire.
- Page 10 8. Description of control panel 1) Details of control panel Ice transparency Water cleaning Unloading indicator Drainage indicator indicator detergent Full indicator Ice-making indicator Timer indicator cleaning Ice thickness Fault indicator indicator Ice thickness control button Auto start button Transparency control button Start button Clean button 2) Functions of buttons on control panel...
- Page 11 9. Basic operations of control panel ■ With power ON, the following 3 icons will be displayed and this is the standby mode. ■ The product shall be operated in standby mode. Function Status Indicator Details Stage 1 Stage 2 Normal ice-making status Normal unloading status Normal ice-making...
- Page 12 10. Fault code identification Fault Type Identification Status Description Condenser sensor fault Normally ON/flash Condenser sensor fault Drainage fault Flash Drainage fault or float switch fault Temp. sensor Normally ON/flash Ambient temperature sensor fault Ambient temperature sensor fails or ambient temperature Temp.
- Page 13 11. Operation of cleaning functions 1) Prepare the following items - Detergent, disinfectant, cloth and rubber gloves 2) Precautions - Remove scale in the water tank and pipeline before cleaning the ice-maker. - Do not use toxic chemicals or bad substances. - Paid services will be offered if the product is damaged due to the customer’s improper cleaning.
- Page 14 12. Verify before applying for aftersales repair! 13. 售后服务指南 Symptom Verify Actions to be Taken It won’t start 1. Whether power is ON? 1. Connect the power supply. 2. Whether power switch is OFF? 2. Turn on the power switch. 3.