Thank you for purchasing this product. Please read the user manual carefully before use.
Main body
Body
On/Off Button
LED Indicator
Mist Output, Low / High
Timer, 1hr/ 2hrs/ 5hrs
Diffusing Hole
Nozzle
Fragrance Oil Bottle
Oil Pipe
Air Inlet
Nozzle Top Cover
USB Slot
Type-C USB *Power adapter not included
Operation Instructions
Pull up the nozzle and remove it from the main body. Hold the nozzle and rotate the bottle in clockwise to remove.
Fill up the oil into the orignial bottle or change your favourite essenital oil bottle. Hold the nozzle and rotate the bottle in anti-clockwise to secure.
Insert the nozzle (with bottle) to the main body. Press down the nozzle perfectly and ensure the nozzle locked in the slot.
Insert the type-c USB cable to the power adapter socket or a USB port.
Remove the sticker. Press the On/Off button to start the device and switch the mist output and timer.
Nebulizer will begin diffusing.
Note:
For best result, we recommend to use 100% pure essential oil with this nebulizer. Artificial fragrance, flavor, or impurities might harm to the unit.
Always unplug the product from the electrical socket when not in use.
Do not remove the nozzle and moving the device during operation.
Keep the nebulizer on a stable and flat surface. Carpet, cushions, or other uneven surfaces might affect the ventilation system.
Use any 5ml, 10ml or 15ml of your favourite essential oil bottle or the default oil bottle to this nebulizer. You may cut the oil pipe to fit in different size of the bottle. (Make sure to cut from the flat part as the non-flat part is for oil absorption.)
Setting Instructions
On/Off (1 LED indicator)
Press to turn on the device
Default setting is low level output, 5 mins diffusing with 10 mins off intervals.
Default timing is 1hour working time.
Mist output (2 LED indicator)
Default setting is low level output, 5 mins diffusing with 10 mins off intervals.
Press the mist output button once to switch to high level output, 5mins diffusing with 5 mins off intervals.
Press the mist output button twice to switch back low level output.
Timer (3 LED indicator)
Default timing is 1hour working time.
Press the timer button once to switch to 2hours working time.
Press the timer button twice to switch to 5hours working time.
Press the time button third to switch back 1hour working time.
Clean & maintenance
Fill the rubbing alcohol to the empty bottle. *The rubbing alcohol should be under 75% concentration*
Plug in and turn on the nebulizer for 5mins.
Remove the bottle, pull up to take out the nozzle top cover.
Use cotton swap to dip the rubbing alcohol, brush softly to clean the nozzle.
Note:
Never use the alcohol with over 75% concentration, it might hurt the machine.
Alcohol is flammable, keep the indoor air circulation to prevent fire occur.
For best result, clean the nozzle 1-2times per week.
Clean the nozzle and change the oil pipe before change any other of the essential oil.
Strength of aroma will vary depending on settings and different types of oil. Find the settings that fit your needs.
Use only pure natural essential oils to prevent damaging the diffuser components.
Make sure do not tilt downthe nozzle or device as the oil will leak and might harm the device.
Product Dimensions
Product Name: Bamboo
Model code: BL P -002
Product Size: Ø80mm(L) x 84.2mm(W) x 155.6mm(H)
Material: PP + Aluminum
Power input: DC5V / 2.5W
Manufacturer: Bloomy Lotus LLC
Main unit weight: 240.5g
Coverage Area: Up to 80m²
Environment: Indoor
Run Time:1 /2 /5 hours
Design: USA Made in China
Troubleshooting
If you experienced unsatisfactory operations, please follow our troubleshooting guidelines listed below.
Symptom
Possible Cause
Solution
Diffuser does not turn on
Power cord /USB not connected correctly
Disconnect power cord /USB and re-connect carefully
The device is on but no mist
Nozzle did not attach securely
Remove the nozzle and reinstall to the slot correctly
The oil bottle in empty or the oil level lower than the end of the oil pipe
Add more essential oil, change another oil bottle or the oil pipe.
Using only the base notes oil to run the machine
Mix with middle/top notes oil or use other oil to run the machine
Oil pipe did not attach securely to the nozzle
Reinsert the oil pipe into the nozzle correctly
Oil is leaking from the nozzle / nebulizer / fragrance
The nozzle / nebulizer oil bottle is in a tilt or set on side status.
Always put them on a stable and flat surface. Never tilt or set on side the nebulizer and nozzle.
Videos
Bloomy Lotus Bamboo - How to Use Video
Documents / Resources
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Need help?
Do you have a question about the Bamboo and is the answer not in the manual?
Questions and answers