LENCO DIR-140 User Manual page 26

AUX (Line input)
Aux in mode plays audio from an external source such as an MP3 player or other audio device with
line out.
To play audio with Aux in mode:
Turn the volume low on both the Radio and if adjustable, the audio source device.
Connect the external audio source to the AUX IN 3.5mm stereo socket.Either press MODE until the
display shows AUX IN or select AUX infrom the Main menu.
Adjust the volume of the DIR-140 (V2), if necessary, the audio source device as required.
BLUETOOTH
Press MODE until the display shows Bluetooth or select Bluetooth from the Main menu.You will hear
a sound which means the the pairing mode is active. Activate the Bluetooth pairing mode of your
phone/tablet and search for the name Lenco DIR-140 on your phone/tablet. Then click it to
pair.When successfully connected it will show connected on the disply of the unit. You now can play
music via Bluetooth and adjust the volume on the DIR-140 (V2) or the connected device.
26