Loading Paper; Loading Paper In Tray 1 - Ricoh AP3850C Setup Manual

Loading Paper

This section shows how to load paper in the paper tray. If you do not load paper,
the setup procedure will not complete properly.
The side guide and end guide of each paper tray is set to the following values at
factory default. The loading procedure is different if you choose to load paper
that is a different size from that of factory default.
⇒ p.47 "Loading Paper in Tray 1"
⇒ p.49 "Changing the settings"
❖ ❖ ❖ ❖ Settings of the Paper Trays at Factory Default
• Tray 1 (Standard): 11" × 8
• 2000-sheet Large Capacity Tray (Optional): 11" × 8
Reference
For more information on the size and feed direction of paper that can be load-
ed in the tray, see "Paper and Other Media" in Maintenance Guide.
For more information on loading paper in the Bypass Tray, see "Load Paper in
the Bypass Tray" in Maintenance Guide.

Loading Paper in Tray 1

Important
❒ Tray 1 is 11" × 8
1
A A A A
Slide the paper tray out slowly until it stops.
1
/ "K exclusive
2
"K paper exclusive. Load only the 11" × 8
/
2
ZDJH003J
Loading Paper
1
/ "K exclusive
2
1
/ " size paper.
2
2
47