go hearing Go Ultra User Manual page 17

Removing and attaching your slim tube to your
hearing aid
Each Go hearing aid comes with a standard size 2 slim tube
attached to it. Should you need to replace this slim tube, follow
the steps below.
1. Remove the slim tube by holding the wider/thicker part of
the hearing aid body with one hand. With the opposite hand,
firmly grip the base of the slim tube where it connects to the
hearing aid. Turn the slim tube 90 degrees anticlockwise and
pull the tube off the hearing aid.
2. Attach the new slimtube, by aligning the base of the slim tube
with the hearing aid and gently, but firmly push it onto the
hearing aid until it clicks into place. Once attached correctly,
the base of the slimtube should align with the body of the
hearing aid.
1 9