Entering An Ip-Fax Destination - Ricoh Aficio 3232C Facsimile Reference Manual

Entering an IP-Fax Destination

When using IP-Fax transmission,
specify the IP-Fax destination (IP ad-
dress, host name, or alias telephone
number) in place of the fax number.
See p.67 "IP-Fax Function".
Note
❒ You can enter up to 128 characters.
A A A A
Press to switch the destina-
tion to IP-Fax destination.
B B B B
Press [Manual Input].
Note
❒ You can manually enter the des-
tination using the ten keys.
C C C C
Enter the IP-Fax destination and
then press [OK].
Note
❒ If you have set both of "Enable
H.323" and "Enable SIP" pa-
rameters to "On" with "IP-Fax
Settings" under "Facsimile Fea-
tures", [Protocol] appears. Press
this button to select a protocol
to be used.
Specifying a Destination
❒ If you enter an incorrect charac-
ter, press [Backspace], or [Delete
All]. Then, re-enter the character
correctly.
❒ To change the IP-Fax destina-
tion after pressing [OK], press
[Edit Dest.], re-enter an IP-Fax
destination, and then press
[OK].
Reference
"Entering Text", General Set-
tings Guide
The destination is specified.
Note
❒ Press [ProgDest] in this order to
store the entered IP-Fax destina-
tion in the Address Book. See
p.38 "Registering Entered Des-
tinations to the Address Book".
2
37