Pausing And Ending Auto Capture - Nikon Z9 Settings Manual

D
Cautions: Auto Capture
During auto-capture standby, the camera focuses as described below.
-
[Capture criteria] > [Distance] enabled (M): The camera focuses at the distance selected for
[Far].
-
[Capture criteria] > [Distance] disabled (U): The camera focuses at the distance in effect when
auto capture began.
The camera may fail to detect subjects in the [Target area] when there are multiple subjects in the
frame.
Falling rain and snow may interfere with subject detection. Auto capture may be triggered by falling
snow, heat haze, or other weather phenomena.
D
During Auto Capture
All controls other than shutter-release button half-presses and the DISP, video-record, and O (Q)
buttons are disabled while auto capture shooting is in progress. End auto capture before attempting to
adjust camera settings.

Pausing and Ending Auto Capture

To pause auto capture and return to the settings confirmation dialog, press the video-record button.
Auto capture can be resumed by pressing the button again.
To end auto capture and exit to the shooting display, press the O (Q) button.
39
Initiating Auto Capture