Haier HSW79F18CIMM User Manual page 21

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Cubed ice function
Under any state (locked or unlocked), press the button "H2" (Cubed ice function
selector), the buzzer rings once, the indicator "h2" (Cubed ice function) illuminates,
and then the Cubed ice function will be turned on.
Notice
1. When the indicator "h2" (Cubed ice function) illuminates, the indicator "h1" (Wa-
ter intake function) and the indicator "h3" (Crushed ice function) go off. After
the micro-switch of distributor is pressed, cubed ice will flow out of the intake
port.
2.
When the ice maker is firstly connected to electricity to operate, the Cubed ice
function is turned off by default.
3. Press the micro-switch of dispenser, the light of it turns on with the cover of it
open. Then, the motor of crushing ice starts to rotate anticlockwise to push ice
cubes. Loosen the micro-switch of dispenser, the motor of crushing ice stops,
the cover of dispenser will close and the light will go off after 5 seconds.
4. Under the state of Cubed ice, when Cubed ice time is longer than 50 seconds,
there will be buzzer starting to alert (knocking) to notice users to shut it down.
When the time reaches 1 minute, it is forced to stop Cubed ice, and it is effec-
tive when the switch is pressed next time.
5. During Cubed ice, if the fridge door is opened, the motor that delivering ice will
stop, with the cover of dispenser closed, light of dispenser off, and Cubed ice
will be stopped.
6. It is forbidden to get ice with the fridge door open.
Crushed ice function
Under any state (locked or unlocked), press the button "H3" (Crushed ice function
selector), the buzzer rings once, the indicator "h3" (Crushed ice function) illumi-
nates, and then the Crushed ice function will be turned on.
Press 1 time
Cubed ice function on
Press 1 time
Crushed ice function on
Indicator on
Indicator on
Use
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents