Timeshift; Clip Recording - LG HKS-7000Q Owner's Manual

Timeshift

HDD
Do not miss a scene from a live broadcast.
If the telephone rings while you are watching your
favorite live broadcast, just press TIMESHIFT and
PAUSE/STEP before answering the phone.
The timeshift function will be activated and the
broadcast is then recorded for later viewing.
After the phone call or viewing interruption, press
PLAY (B) or m/M to watch the program.
Press STOP to return to the live broadcast.
Timeshift (Pause, Live TV/Playback)
Operation
HDD
You can store a program in the HDD storage cache
temporarily.
Press TIMESHIFT while watching a TV program.
The Progress Bar display appears on the screen as
shown below. The Progress Bar changes to timeshift
icon after 10 seconds.
1 2
3 4
1. Indicates playback mode.
2. Indicates current Timeshift position.
3. Indicates Timeshift start time.
4. Indicates Timeshift elapsed time.
5. Indicates the time that is one hour from Timeshift
start time.
Tip:
You can use trick play functions (Slow, Scan, etc.)
during timeshift. Refer to Playback Operation on
pages 25-28.
Note:
After 3 hours, the Timeshift will stop automatically.
The Timeshift is not available during timer
recording.
The changing a programme or an external input are
not available during the Timeshift.
After setting [Timeshift] to [ON], if you press
HDD/DVD (on the front panel), HOME or
MENU/LIST during the Timeshift, the TImeshift will
stop.
Jump to Start or End during Timeshift
1. Press ENTER during timeshift. The menu will
appear.
2. Press b b and playback starts from the very
beginning of the timeshift.
Press B B and jumps to the very end of the timeshift
then goes to pause mode.
To Exit the Timeshift
1. Press STOP to exit Timeshift function.
Confirm message will appear.
2. Use b / B to select [Yes] then press ENTER.
The current broadcast is displayed on the screen.

Clip Recording

HDD
You can edit during Timeshift to store the program on
HDD (Hard Disk Drive).
1. During Timeshift, use play, pause step, scan and
slow-motion to find the staring point.
2. Press REC at the starting point of the section you
want to record.
Progress of the edit is indicated in red on the
Progress Bar.
5
3. Use play, pause step, scan and slow-motion to fine
the ending point.
4. Press REC or STOP at the ending point of the
section you want to stop recording.
Normal playback continues.
5. Press STOP to stop Timeshift.
Confirm message will appear.
6. Use b / B to select [Yes] then press ENTER or
Press STOP again.
The selected part(s) is recorded to HDD.
Note:
The last selected section is only recorded on the
HDD.
Selected sections are recorded on the HDD.
If you want to stop Clip recording, press STOP. If
you press POWER to stop Clip recording, the
program may not be recorded on the HDD.
Clip records cannot be made for sections lasting
less than 4 seconds.
Clip records are recorded only with XP mode.
37