Setting Up The Recorder - Fluke 1750/ET Operator's Manual

Setting Up the Recorder

To adjust the settings of the Recorder, tap Menu>1750 Setup.
The Setup screen shows setup options.
From the Setup screen, you can adjust either the recording period information or the
Recorder settings. Tap an icon on the Setup screen to view or configure:
•
Clock
•
Probe Detect
•
IP Address
•
Measurement Description
•
Nominal Power
•
Phase Swap
•
Volts/Current Ratio
•
Recorder Name/Password
•
Snapshot Period
•
Language
Power Recorder
Setting Up the Recorder
azd127.bmp
azd140.bmp
39