Cleaning And Servicing; Troubleshooting; Customer Service - Siemens EX8 NY Series Information For Use

Hide thumbs Also See for EX8 NY Series:
Table of Contents

Advertisement

Setting
Selection
​ ⁠ ​ ⁠ ​ ⁠
Fan run-on
​ ⁠ – Fan switches off when the hob is switched off.
​ ⁠ – Switched on in automatic mode
​ ⁠ – Switched on with standard fan run-on
​ ⁠ – No change to the settings
​ ⁠ ​ ⁠ ​ ⁠
Switching the light on automatically
​ ⁠ – Switched off
​ ⁠ – Switched on
The light switches itself on when the hob is
switched on.
​ ⁠ ​ ⁠ ​ ⁠
Switching the light off automatically
​ ⁠ – Switched off
​ ⁠ – The light switches itself off when the hob is
switched off.
1
Factory setting (may vary according to model)
24  Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
24.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, a retailer or the online
shop siemens-home.bsh-group.com .
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Never use unsuitable cleaning products.
Do not use cleaning products while the hob is still
hot. This may cause marks on the surface.
Unsuitable cleaning products
¡ Undiluted detergent
¡ Detergent intended for dishwashers
¡ Abrasive cleaning products
¡ Aggressive cleaning products such as oven spray
or stain remover
¡ Abrasive sponges
¡ High-pressure or steam jet cleaners
25  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
1
1
1
Description
Setting for whether and how the fan is to run on
after switching off the hob.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
24.2 Cleaning the hob
Clean the hob after every use to stop cooking residues
from getting burnt on.
Requirement: The hob must be cold. Do not allow the
hob to cool down if it has sugar stains, plastic or alu-
minium foil on it.
1.
Remove heavy soiling using a glass scraper.
2.
Clean the hob with a cleaning agent for glass
ceramic.
Follow the cleaning instructions on the packaging of
the cleaning agent.
Tip: You can achieve good cleaning results using a
special sponge for glass ceramic.
24.3 Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this.
Note: Do not use a glass scraper.
1.
Clean the hob frame with hot soapy water and a soft
cloth.
Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord of this appliance is damaged, it
must be replaced with a special connection cable,
which is available from the manufacturer or his Cus-
tomer Service.
Cleaning and servicing en
21

Advertisement

Table of Contents
loading

Table of Contents