Bosch Worcester Greenstyle Bewdley 8 Installation, Servicing And User Instructions Manual page 11

INSTALLATION
CONVERTING TO USE REAR FLUE
1. Remove the four (A) Bolts, (C) washers, and (B) nuts.
2. Remove the four 1/4-20 x 1/2 self-tapping screws that are
holding the heat shield on.
3. Remove the two 1/4-20 nut that are holding the heat shield
cover plate on.
4. Remove the four nuts that are holding on the flue cover plate.
You will need to reach in through the top opening of the
stove to gain access to all of the bolts when removing the
flue cover plate.
1 2 3 4
9 10 11 12 13
6720818040 B 04/2017
A
B
C
5 6 7 8
14 15 16
5. Attach the flue collar with four (A) bolts, Four (B) nuts, and
four (C) washers.
You will need to reach in through the top opening of the
stove to gain access to all of the bolts when securing the
flue collar.
1 2 3 4
9 10 11 12 13
6. Attach the flue cover plate to the top of the stove with the four
nuts you previously removed.
7. Reattach the heat shield to the back of the stove using the
four 1/4-20 x 1/2 self-tapping screws that were previously
removed.
A
C
B
5 6 7 8
14 15 16
11