Advertisement
V . C O M F O R T A D J U S T M E N T S
Seat Position
You can move the seat forward or rearward by changing the extru-
sion mounting position.
To change the position:
1. Turn off the power to the controller.
2. Make sure the power chair is in drive mode.
3. Unplug the controller connector(s) from the power base.
4. Remove the seat from the power base.
5. Remove both extrusions from the bottom of the seat.
6. Reposition the extrusions on a different set of mounting holes.
You must move both extrusions the same number of holes either
forward or backwards. See figure 9.
WARNING! Changing the position of the seat can
cause instability. Do not change your seating
configuration
Mobility
Products
Provider.
WARNING!
programming or center of gravity of the power
chair to meet the individual needs of the client can
result in personal injury and/or equipment damage.
7. Fasten the extrusions back onto the bottom of the seat.
8. Reinstall the seat.
9. Reconnect the controller to the power base.
270-400 lbs.
Seat Depth
(122-181 kg)
18 in.
Allowed
20 in.
Allowed
22 in.
Allowed
24 in.
Allowed
NOTE: Pride Mobility Products offers a wide variety of seating
options available on power chairs in the Heavy Duty category,
which covers a wide range of user weights from 270-450 lbs. (122-
204 kg). RESNA testing to determine seat stability for the range
of seat depths across the user weight range in the Heavy Duty
category has been performed. Refer to the chart above for Pride's
recommendations for allowable seat depths by user weight range.
WARNING! Maximum weight capacity is reduced to
400
lbs.
configurations.
Jazzy Elite Series
without
first
contacting
or
your
authorized
Failure
to
properly
401-450 lbs.
(182-204 kg)
Not Allowed
(181
kg)
on
18-in.
www.pridemobility.com
Pride
Pride
adjust
the
Allowed
Allowed
Allowed
Figure 9. Seat Position Adjustment
seat
depth
SEAT MOUNTING HOLES
WARNING! The center of
gravity of your power chair
was
factory
set
to
position that meets the
needs of the demographic
majority
of
users.
Your
authorized Pride Provider
has evaluated your power
chair
and
made
any
necessary adjustments to
suit
your
specific
requirements.
Adjusting
the
seat
position
can
cause instability. Do not
change
your
seating
configuration without first
contacting Pride Mobility
Products
or
your
authorized Pride Provider.
a
13
- Quick Links:
- Batteries and Charging
Hide quick links:
Advertisement
